Solar PV Design
Solar panel count, array wattage, tilt angle, azimuth, roof area, and microinverter planning calculators.
PV array size, solar panel count, string voltage, cable voltage drop, charge controller checks, and solar energy output.
Solar panel count, array wattage, tilt angle, azimuth, roof area, and microinverter planning calculators.
PV string voltage, current, cable voltage drop, and charge-controller checks.
PV production, solar kWh, self-consumption, grid export, project cost, and cost per kWh calculators.
Estimate solar allocation for a defined interval, including direct site use, battery charging, grid export, grid import, and self-consumption share.
Open calculatorEstimate PV circuit voltage drop, drop percentage, and remaining margin to a 3 percent reference from entered current, resistance, length, and system voltage.
Open calculatorEstimate cold PV string Voc and STC Vmp, then compare string voltage with an entered inverter maximum for preliminary equipment review.
Open calculatorCompare fixed PV array tilt with site latitude and estimate tilt offset, cosine alignment, and screened daily energy from a documented baseline.
Open calculatorCompare PV array azimuth with a project reference direction and estimate circular-angle alignment from an entered daily-energy baseline.
Open calculatorEstimate unit count, AC/DC capacity, DC/AC ratio, and branch-group count from entered module and microinverter data.
Open calculatorCalculate array current, margin factor, and recommended controller current from PV array watts, battery voltage, and sizing margin.
Open calculatorCompare time-aligned PV generation and site load, with optional battery flows, in a transparent behind-the-meter energy balance.
Open calculatorSeparate module operating or short-circuit current from the effect of parallel PV strings, with an explicit adjustment factor and screening limit.
Open calculatorCalculate PV energy results from a documented yield input supplied by PVWatts, SAM, measured data, or another site-specific resource. This is not a generic peak-sun-hours calculator.
Open calculatorEstimates preliminary PV array wattage and panel count from daily energy, peak sun hours, system losses, and panel wattage.
Open calculatorCompares PV string module counts against cold-weather Voc and inverter MPPT voltage limits using module data, temperature assumptions, and equipment voltage ratings.
Open calculator